< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=731612624224948&ev=PageView&noscript=1" />

Contact us on +86 21 5712 1166 or crushers@sanmecorp.com

Details of limestone gravel production line with 500-550 tons per hour

Details of limestone gravel production line with 500-550 tons per hour

Design output

500-550/t

Material

Coarse, medium and fine crushing of medium and soft rocks such as limestone, dolomite, marl, tuff, sandstone and clinker

Application

Chemical, cement, construction, refractories and other industrial sectors for coarse crushing, medium crushing and fine crushing of all kinds of medium hardness materials.

Equipments

Vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor

  • basic procedure

    First blasting down from the mountain stone through feeder evenly feeding jaw crusher preliminary broken, after coarse crushing of semi-finished products by belt conveyor to counterattack crusher further broken, after the secondary crushing of stone by belt conveyor to sieve screening out the different specifications of stones, satisfy clients' demand for particle size of gravel pile by belt conveyor to finished product, The stones larger than the size of the upper screen mesh are returned to the impact crusher through the belt conveyor for re-crushing, forming a closed-circuit cycle.

Details of limestone gravel production line with 500-550 tons per hour

serial number
name
type
power(kw)
number
1
vibrator feeder
ZSW6015
30
1
2
jaw crusher
CJ4255
200
1
3
hanging feeder
GZG100-4
2x2X1.1
2
4
impact crusher
CHS5979
2x440
2
5
vibrating screen
4YKD3060
2x30x2
2

 

 

serial number breadth(mm) length(m) angle(°) power(kw)
1# 1200 27 16 30
2# 1200 10+27 16 37
3/4# 1200 24 16 22
5# 800 20 16 11
6-9# 650 (four) 15 16 7.5x4
10# 650 15 16 7.5
P1-P4# 650 10 0 5.5

Note: this process is for reference only, all the parameters in the figure do not represent the actual parameters, the final result will be different according to different characteristics of stone.


Technical description:

1. This process is designed according to the parameters provided by the customer. This flow chart is for reference only.

2. The actual construction should be adjusted according to the terrain.

3. The mud content of the material cannot exceed 10%, and the mud content will have an important impact on the output, equipment and process.

4. SANME can provide technological process plans and technical support according to the actual requirements of customers, and can also design non-standard supporting components according to the actual installation conditions of customers.